4 establishing a telnet connection, Establishing a telnet connection -4 – Cabletron Systems ESX-1380 User Manual

Page 24

Text mode
Original mode

Chapter 2: Local Management Requirements

2-4

ESX-1320/ESX-1380 Local Management Guide

2.4

ESTABLISHING A TELNET CONNECTION

Once the ESX has a valid IP address, you can establish a Telnet session
with Local Management from any TCP/IP based node on the network.
Telnet connections to the host device require the community name
passwords assigned at the SNMP Community Names screen. Refer to the
SNMP Community Names section of this manual for additional
information about community names.

NOTE

See the instructions included with the Telnet application for
information about establishing a Telnet session.