beautypg.com

3 selecting the port administrative status, Selecting the port administrative status -3 – Cabletron Systems ESX-1380 User Manual

Page 51

background image

Selecting the Port Administrative Status

ESX-1320/ESX-1380 Local Management Guide

8-3

8.3

SELECTING THE PORT ADMINISTRATIVE STATUS

To select the bridge port administrative status, perform the following
steps:

1. Use the arrow keys to highlight the [BRIDGE_PORT X] field.

2. Press SPACE bar or BACKSPACE to select the bridge port you want

to configure. The selected bridge port appears in the Bridge Port
Admin Status field.

3. Use the arrow keys to highlight the BRIDGE PORT ADMIN

STATUS: PORT X - - > ALL PORTS [ENABLED] field.

4. Press SPACE bar or BACKSPACE to select ENABLED or

DISABLED.

For example, the following bridge setup indicates that bridge port 01
is configured to bridge traffic to all ports:

BRIDGE PORT ADMIN STATUS: PORT 01 - - > ALL PORTS
[ENABLED]

5. Use the arrow keys to highlight the SAVE command field.

6. Press ENTER. The Event Message field at the top of the screen

displays “SAVED OK”.