Cabletron Systems ESX-1380 - Manual (Page 39)

Setting the Default Interface
ESX-1320/ESX-1380 Local Management Guide 4-7
4.7 SETTING THE DEFAULT INTERFACE
To set the default interface, perform the following steps:
1. Use the arrow keys to highlight the Default Interface field.
2. Enter the interface number for the default gateway in this field.
3. Press ENTER. If the interface entered was a valid format, the cursor
returns to the beginning of the Subnet Mask field. If the entry was not
valid, the Event Message field displays “PERMISSIBLE RANGE:
1...1”. Local Management does not alter the current value and
refreshes the Default Interface field with the previous value.
4. Use the arrow keys to highlight the SAVE command field.
5. Press ENTER. The Event Message field at the top of the screen
displays “SAVED OK”.
4.8 COM PORT APPLICATIONS
The ESX communication ports support the following application:
• Cabletron Systems Local Management connections
NOTE
Before setting the default interface, you need to assign a
default gateway.