PRG Mbox Mini Manual 3.9 - Manual (Page 29)

MBOX ® MINI USER MANUAL 21
PATCHING FIXTURES
Patching Fixtures
In order to control Mbox, it will need to be "patched" to a control console. Patching allows channels to be mapped to
the controllable elements of the Mbox environment. Use the following guidelines when patching:
+ The Mbox Mini software, using 4 layers of playback, requires at least 190 channels.
+ One control universe per server is required.
+ By default, Mbox Mini is configured to respond to Art-Net universe 0.
CAUTION! For ease of operation, the many channels that make up one Mbox server are divided into multiple fixtures.
Unless you are an advanced user, it is strongly recommended that you patch all fixtures that are part of the Mbox
profile. If you do not patch all of the associated fixtures, undesirable results will occur! The parameter mapping charts
on the following page shows all fixtures that make up a single Mbox server. The fixtures must be patched in the order
shown.
Parameter Mapping
Summary: Single Output
Start Size Type Universe
1 11 Master
1st
190 Total
Channels
12 8 Keystone
20 14 Shutter
34 39 Layer 1
73 39 Layer 2
112 39 Layer 3
151 39 Layer 4
Summary: Dual Output - Panoramic Wide
Start Size Type Universe
1 11 Master
1st
190 Total
Channels
12 8 Keystone
20 14 Shutter
34 39 Layer 1
73 39 Layer 2
112 39 Layer 3
151 39 Layer 4