PRG Mbox Mini Manual 3.9 - Manual (Page 27)

MBOX ® MINI USER MANUAL 19
Launching Mbox Mini
When launched, the Mbox Mini software will initially show a splash screen. After a brief pause, the application window
will appear. During this time the software will scan and index all media. Depending on the preferences, the software
may enter Fullscreen mode. In Fullscreen mode, if no control signal is being received the output screen may be black.
This is normal and you can exit Fullscreen mode at any time (see below).
While in Window mode, the application window and its user interface will be shown. This window contains two tabs:
Mbox and Setup as shown in this sample screen below:
Upon launch, the Mbox tab will be selected. This tab shows the server’s video output. The Setup tab is used to
configure the server preferences and operating modes. Refer to
"Application Window" on page 35 for more in-depth
information about these functions.
While Mbox is running, there are two important key combinations to note:
+ To toggle between Fullscreen or Window mode, press [  F].
+ To quit Mbox, press [  Q].
Training Video: Mbox Media Server Training Video Chapter 4: Patching