PRG AutoPar User Manual 2.1 - Manual (Page 40)

32 AUTOPAR ® WASH LUMINAIRE USER MANUAL
Replacing Front Lens
The luminaire includes four different front lens which can be swapped as needed.
Parts:
LENS, VERY NARROW
LENS, NARROW
LENS, 8-ROW LENTICULAR
LENS, 12-ROW LENTICULAR
Tools:
none
WARNING: Remove power from luminaire before performing any maintenance procedures.
To replace Front Lens:
Step 1. Remove power from luminaire.
Step 2. At securing ring, squeeze flanges and remove (Figure 4-3).
Step 3. Remove Front Lens.
Step 4. Align raised areas on back of new Front Lens with notches in Rotation Assembly. (Lens can be installed in
one of two 180° orientations.)
Step 5. Re-install securing ring, ensuring it is fully seated in its groove.
Figure 4-3: Replacing Front Lens
Front Lens
Securing Ring
Squeeze flanges
Lens Rotation Assembly
to loosen