Menu functions – PRG AutoPar User Manual 2.1 User Manual
Page 27
AUTOPAR
®
WASH LUMINAIRE USER MANUAL
19
Menu Functions
The following is a graphic representation of the menu system. Fixture, Dmx, Lamp and Test are top level functions
which have a series of sub-functions associated with each.
Function
Purpose
Fixture
Top level menu which accesses luminaire information such as serial number, software
version, and total operation hours.
Status
Indicates calibration status.
Serial No
Displays luminaire serial number.
Version
Displays luminaire software version by date and time.
FixtHrs
Displays total number of hours luminaire has been powered on.
Dmx
Top level menu which accesses luminaire DMX address and control options.
Address
Sets DMX512 address.
Rev Tilt
Sets reverse tilt option: yes or no.
Rev Pan
Set reverse pan option: yes or no.
Time Chan
Sets luminaire to Timing Channel Mode: yes or no.
Lamp
Top level menu which accesses lamp information, turns lamp on or off, and configures
lamp operation at luminaire power-up.
Lamp On
Turns lamp on or off: yes or no.
Reset Lamp Hours
Resets total lamp operation hours.
Requires a confirmation.
Lamp Hours
Displays total number of hours lamp has been powered on.
Power-up On
Configures lamp to turn on at luminaire power-up: yes or no (default).
Test
Top level menu which accesses self-test options. Allows tests to be performed with-
out DMX512 input.
NOTE: Tests will not operate if DMX is present.
Beam Test
Rotates lens through a full range of motion at full speed.
Press [Enter] to start. Press any button other than [Enter] to stop.
Pan Test
Moves luminaire head through entire range of pan motion at full speed.
Press [Enter] to start. Press any button other than [Enter] to stop.
Tilt Test
Moves luminaire head through entire range of tilt motion at full speed.
Press [Enter] to start. Press any button other than [Enter] to stop.
All Tests
Runs Beam, Pan and Tilt tests simultaneously at full speed.
Press [Enter] to start. Press any button other than [Enter] to stop.
Fixture
Status
OK
Serial No
xxxxxx
Version
xx/xx/xx | x:xx
FixtHours
xxx
Dmx
Address
xxx
Rev Tilt
Yes/No
Rev Pan
Yes/No
Time Chan
Yes/No
Lamp
Lamp On
Yes/No
Rst Lamp Hr
Yes/No
LampHours
xxx
Powrup On
Yes/No
Test
Beam Test
Pan Test
Tilt Test
All Tests