PRG AutoPar User Manual 2.1 - Manual (Page 28)

20 AUTOPAR ® WASH LUMINAIRE USER MANUAL
DMX512 OPERATION
Channel Mapping
These tables assume a DMX512 start address of 1. When a different starting address is used, this address becomes
channel 1 function and other functions follow in sequence.
Note: Use Menu Display to enable Timing Channels. Refer to "Menu Functions" on page 19.
DMX Channel Function Default Virtuoso® Control
1 Intensity 0 (dummy channel)
2-3 Pan 32767 Pan
4-5 Tilt 32767 Tilt
6 Lens 0 Beam
7 Control 0 Start/Douse/Reset
DMX Channel Function Default Virtuoso® Control
1 Intensity 0 (dummy channel)
2-3 Pan 32767 Pan
4-5 Tilt 32767 Tilt
6 Lens 0 Beam
7 Focus Time 0 (timing channel)
8 Beam Time 0 (timing channel)
9 Control 0 Start/Douse/Reset