Information screen, Test screen, Information screen test screen – PRG Best Boy 4000 User Manual User Manual
Page 43: To open
BEST BOY 4000
®
SPOT LUMINAIRE USER MANUAL
35
Information Screen
+
Fixture Hours - displays total number of hours that the fixture has
been operated.
+
Run Time - displays current run time in
hours:minutes
format.
+
Software Version - displays operating software date and time,
along with Boot and Shutter versions.
+
Crossload Software - allows the luminaire to send its software
version out over the DMX512 and Ethernet lines to other connected
luminaires in the daisy-chain. (See
page 61 for more explanation of this function.)
Press (X) to return to
Test Screen
+
Recalibrate - press to bring up Recalibration Screen. (During
recalibration, intensity goes out until all mechanism calibrations are
complete and back in position, then fades in.)
+
Recal All - press to bring up Recalibrate All Yes/No options.
+
Disable - press to bring up Disable Screen, which allows specific
mechanisms to be disabled during testing.
+
Moiré Positions - press to bring up Moiré Gobos screen, which
provides a way to specify the wheel positions containing Moiré
gobos. Moiré gobos contain two pieces of glass: one that is fixed
and another that rotates. Due to this construction they do not
contain sensors, and therefore cannot be calibrated to a certain orientation at startup as with standard gobos.
+
Mech Test - press to bring up Mechanical Tests Screen. (See
on page 58 for more
explanation.)
+
Group Test - press to bring up Group Tests screen, which allows multiple luminaires to be run through a
configurable test sequence when chained together via DMX512 or Ethernet. (See
more explanation.)
+
Clean Lenses - press to bring up Cleaning Lenses screen. This feature will position lenses so that all surfaces
may be cleaned with a cloth. (Note that pressing the buttons does not actually clean the lenses.)
+
Fuse Map - press to bring up Fuse Map screen. The Fuse Map provides the circuit board location for all
mechanism fuses.
Press (X) to return to
Info Screen
Test Screen