PRG Best Boy 4000 User Manual User Manual
Page 24
16
BEST BOY 4000
®
SPOT LUMINAIRE USER MANUAL
Step
4. Secure in place by tightening Truss Hook wing bolts (Figure 2-6). Ensure that luminaire is fully supported.
Step
5. Feed safety cables through base and secure around pipe as shown in Figure 2-6.
Step
6. Connect power and data cables according to
Figure 2-6: Standard Hanging Configuration and Dimensions
26.8"
(681 mm )
(711 mm )
28"
16.75"
(425 mm )
(290 mm )
11.4"
35.16"
(893 mm )
(991 mm )
39.0"
(147 mm )
5.78"
3.88"
(99 mm)
27.0"
(686 mm )
(574 mm )
22.6"
(473 mm )
18.64"
(486 mm )
19.15"
12.5"
(318 mm )
32.43"
(824 mm )
(724 mm )
28.5"
*(838 mm)
*33"
*31.6"
*(803 mm)
*(1054 mm )
*41.5"
*31.5"
*(800 mm)
Two (2) Safety Cables MUST be used
for all hanging installations and may
be required by local codes.
Safety cables and input
pigtail cable must be dressed
to avoid interference with
luminaire motion.
NOTE
: Mega-Claw Truss Hook is designed to
be used only with 2.0" OD round tubing.
* Dimensions with Light Shield extended.
POSITIONING
:
Can be mounted in any orientation.
SPACING
:
Hangs on 33 inch (838 mm) centers when
Light Shield is extended.
Hangs on 28 inch (711 mm) centers when
Light Shield is not extended.
WEIGHT
:
109 lbs (49.44 kg) - without hooks