Standing position – PRG Best Boy 4000 User Manual User Manual
Page 27
BEST BOY 4000
®
SPOT LUMINAIRE USER MANUAL
19
Standing Position
The Best Boy 4000 Spot Luminaire can also be used in a standing position. Be sure that the floor or stage will
accommodate the load of this moving luminaire.
To install in a standing position:
Step
1. Unpack case as shown in Figure 2-2 on
, but do not remove hanging brackets. (These are not used
for standing installations.)
Step
2. Carefully remove luminaire from case and place in standing position.
Step
3. Connect power and data cables according to
Figure 2-9: Standing Position