PRG Best Boy 4000 User Manual - Manual (Page 26)

18 BEST BOY 4000 ® SPOT LUMINAIRE USER MANUAL
Step 3. Roll case to mounting location as required (Figure 2-8).
Step 4. Using two people, carefully lift luminaire into mounting position so that display is facing to the side .
Step 5. Using a third person, secure in place by tightening Truss Hook wing bolts. Ensure that luminaire is fully
supported.
Step 6. Feed safety cables through mounting bracket slots and secure around pipe.
Step 7. Connect power and data cables according to "Connecting Power and Data" on page 21.
Figure 2-8: Vertical "Yoke Out" Hanging Configuration
Remove Luminaire From Case
Attach to Vertical Truss
UP
Using a third person, secure in place
by tightening Truss Hook wing bolts.
Using two people, carefully lift luminaire
into mounting position as shown.
Wing Bolt (2)
1
2
Vertical
Truss