Perfect Aire PASC12000 - Manual (Page 9)

TIMER: AUTO START/STOP
FEATURE:
CHECK FILTER FEATURE:
8
Press
DO THIS :
DO THIS:
Press “Check
Filter” Button
Press “Clean
Air” button
DO THIS:
CLEAN AIR FEATURE
(on some models)
SLEEP FEATURES:
Press “Sleep”
button
DO THIS:
NOTE:
In this mode the selected temperature will increase by
2 F/1 C 30 minutes after the mode is selected. The
temperature will then increase by another 2 F/1 C after
an additional 30 minutes. This new temperature will be
maintained for 6 hours before it returns to the originally
selected temperature. This ends the Sleep mode and the
unit will continue to operate as originally programmed.
The Sleep mode program can be canceled at any time
during operation by again pressing the “Sleep” button.
First press the “Timer” button. The indicator light
beside the word “On” will illuminate indicating the Auto
Start program is on.
Press or hold the left “Temp Timer” arrow or right “Temp
Timer” to change the Auto time by 0.5 hour increments,
up to 10 hours, then at 1 hour increments up to 24 hours.
The control will count down the time remaining until start.
The selected time will register for 5 seconds and the
system will automatically revert back to display the
previous temperature setting.
Turning the unit on or off at any time will cancel the
Auto Start/Stop function.
NOTE:
NOTE:
Press the “Clean Air” button. The ion generator is
energized and will help to remove pollen and
impurities from the air, and trap them in the filter.
NOTE:
This feature is a reminder to clean the Air Filter for
more efficient operation. The LED (light) will illuminate
after 250 hours of operation. To reset after cleaning
the filter, press the “Check Filter” button and the light
will go off.
AIR CONDITIONER FEATURES (CONTINUED)