Perfect Aire PASC12000 - Manual (Page 8)

TO SELECT THE OPERATING MODE:
Press “Mode” button
DO THIS:
7
DO THIS:
To choose operating mode, press the Mode button.
Each time the button is pressed, a mode is selected
in a sequence that goes from “Auto”, “Cool”, “Dry” and
“Fan”. The indicator light will be illuminated and remain
on once the mode is selected.
NOTE:
In this mode, the fan speed cannot be adjusted, it
starts automatically at a speed according to the
room temperature. If the room does not get too
warm, it will stay at “Low” speed.
This function is available in COOL mode.
In this mode, the fan will continue to run for 3 minutes
after the compressor shuts off. The fan then cycles
on for 2 minutes, at 10 minute intervals, until the room
temperature is above the set temperature, at which
time the compressor turns back on and cooling starts.
NOTE:
To operate on “Auto” feature:
To operate on “Fan” only (not available on all models):
Use this function only when cooling is not desired, such as
for room air circulation or to exhaust stale air. (Remember
to open the vent during this function, but keep it closed
during cooling for maximum cooling efficiency). You can
choose any fan speed you prefer. During this function, the
display will show the actual room temperature, not the set
temperature as in the cooling mode.
To operate on “Dry ” mode:
In this mode the air conditioner will reduce air humidity.
If the space is a closed or sealed area, some degree of
cooling will continue.
NOTE:
Press or hold either LEFT “Temp Timer” (◄) or RIGHT
“Temp Timer” (►) button until desired temperature is
seen on the display. This temperature will be automatically
maintained anywhere between 62ºF (17ºC) and 86ºF
(30ºC). If you want the display to read the actual room
temperature, see “To Operate on Fan Only” section above.
NOTE: This appliance provides a feature that will allow
you the option of setting temperatures in “Celsius” or
“Fahrenheit”. To change the temperature display on the
main unit, press the left and right button simultaneously for
3 seconds to alternate between the Fahrenheit and
Celsius scale.
Press “ ◄” or “►” to set your
desired temperature.
AIR CONDITIONER FEATURES (CONTINUED)