Perfect Aire PASC12000 User Manual
Page 10
![background image](/manuals/708564/10/background.png)
The Cool circuit has an automatic 3 minute time delayed start if the unit is turned off and on
quickly. After unit is turned off, leave unit off for a minimum of 3 minutes before attempting to turn back on.
This prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue to
run during this time.
The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius.
To convert from one to the other, press and hold the left and right “Temp/Timer” buttons at the
same time, for 3 seconds.
Air Directional Louvers
Use the 4-way directional louvers to direct the air flow
Up or Down (on some models) and Left or Right throughout
the room as needed. Pivot horizontal louvers until the
desired Up/Down direction is obtained.
Move the Center Handles from side to side until the
desired Left/Right direction is obtained.
How to use:
9
Exhaust Control
This Exhaust Control allows the air conditioner to either circulate inside air (Closed) or exhaust air to the outside
(Open). The closed position is used when maximum cooling is desired. It may also be used for air re-circulation
without cooling when the air conditioner is set in any FAN position.
The Open position removes stale air from the room and exhausts it to the outside. Fresh air is drawn in through
normal passages in the home.
FOLLOW ME FEATURE
To activate the Follow Me feature, point the remote control
towards the unit and press the “Follow Me” button. The remote
displays the actual temperature at its location. The remote
control will send this signal to the air conditioner every 3
minutes until the “Follow Me” button is pressed again. If the
unit does not receive the “Follow Me” signal during any 7
minute interval, the unit will beep to indicate the Follow Me
mode has ended. The actual temperature can be displayed
on the unit by pressing the “Fan” only mode. When in the
“Cool” mode, the unit display indicates the set temperature.
NOTE: This feature can ONLY be activated from the
remote control. The remote control serves as a remote
thermostat allowing for precise temperature control at
its location.
ADDITIONAL THINGS YOU SHOULD KNOW
AIR CONDITIONER FEATURES (CONTINUED)