Perfect Aire PASC12000 - Manual (Page 7)

TO TURN UNIT ON:
Press “On/Off” button
DO THIS:
TO ADJUST FAN SPEEDS:
Press “Fan” to
select appropriate
fan speed
DO THIS:
There are (4) fan speeds, “Auto,” “Low,” “Med”
or “High” . Each time the button is pressed,
the fan speed mode is shifted. On “Dry” mode,
the fan speed is controlled at low automatically.
DISPLAYS:
Thoroughly familiarize yourself with the control panel as shown below and all of its functions. Afterwards,
follow the symbol for the functions you desire BEFORE operating the unit. This unit can be controlled by
the unit control or with the remote control.
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
6
AIR CONDITIONER FEATURES
NOTES:
- If the unit breaks off unexpectedly due to power
being cut, it will restart with the previous function
setting automatically when the power resumes.
- In “Fan” only mode, unit will display “Lo” or “Hi”.
Error Codes:
AS - Room temperature sensor error - Unplug the
unit and plug it back in. If error repeats, call
customer service.
- Evaporator temperature sensor error - Unplug the
unit and plug it back in. If error repeats, call
customer service.
(“ ” is displayed as shown in left picture.)
HS - Electric heating sensor error - Unplug the unit and
plug it back in. If error repeats, call customer service.
NOTE: DISPLAYS
NOTE:
Shows the set temperature in “°C” or “°F” and the Auto-
timer settings. While on “Fan” only mode, it shows the
room temperature.