beautypg.com

Directions for use, Top pad removal, Emergency stop – Oakworks DTPM300 User Manual

Page 12

background image

Underside of Tabletop

Top pad flap

9

DIReCTIOnS fOR USe

TOP PAD ReMOvAl

Remove the Top Pad by pulling the flaps at the underside of the table on either end until the Velcro®

detaches. Replace the pad by first centering on the table and then pressing the flaps in place, anchor-

ing the flaps to the Fastener Velcro

®

as shown. (applies to both the 1” (2.5 cm.) & 2” (5 cm.) pads)

Fastener Velcro

®

All electric tables are equipped with an emergency stop switch.

eMeRGenCy STOP

To stop the

operation, push

the red button.

To reset, rotate

the red button

clockwise.

If necessary, you can also remove the plug from the outlet. Be sure access is not blocked for disconnecting

the table from power.