Oakworks Clinician - Electric / Hyrdaulic - Manual (Page 19)

17
SPECS &
WARRANTY
SPECIFICATIONS
ELECTRICAL SPECIFICATIONS
Designed For: North America Europe Japan/Korea
Voltage/Current
Input Frequency
Power Consumption
Table Actuator Voltage
Electric Shock Protection
Mode of Operation
120 VAC/1.5 amps
60 Hz
180 watts
24 VDC
220 VAC/0.8 amps
50 Hz
180 watts
24 VDC
100 VAC/1.8 amps
50/60 Hz
180 watts
24 VDC
Class I Equipment
Continuous Operation
@ 10% Duty Cycle
Class I Equipment
Continuous Operation
@ 10% Duty Cycle
Class I Equipment
Continuous Operation
@ 10% Duty Cycle
Storage &
Transport
Temperature: 32º - 100º F 0º-38º C Humidity: 60% relative humidity Pressure: no limitations known
During transport, DO NOT stack containers.
WARRANTY
For full warranty details, please visit www.oakworks.com
All warranties are limited to factory-provided replacement parts, factory repair or replacement, at the
discretion of O
akworks ® .
All warranties exclude damage caused by improper set-up, accident, abuse, misuse, neglect, use for other
than intended purpose or reasonable wear such as tears in the upholstery.
All warranties are invalidated by non-factory modifications and unauthorized repairs, which will
immediately terminate all liability by O
akworks ® for the product or damages caused by its use.
The buyer and its customers shall be responsible for proper set-up and use of the products as well as any
supervision required for safety. In no event shall O
akworks ® be liable for any special, indirect, conse-
quential, incidental, exemplary or punitive damages or costs. Use of non-approved cleaning solutions voids
the guarantee on all fabrics.
The warranties set forth herein are the sole and exclusive warranties provided by o
akworks ® . There are
no other warranties, representations or guarantees provided by O
akworks ® either expressed or implied,
including warranties of merchantability and fitness for a particular purpose.
Warranty valid with proof of purchase.
ETL listed
Complies with: UL 962, CAN/CSA C22.2 No. 68-09,
Tested to: EN60335-1, EN60335-2-32
SPECIFICATIONS & WARRANTY