Oakworks Antigua - Manual (Page 10)

PRODUCT DESCRIPTION
3
PRODUCT DESCRIPTION
TABLE SPECS* :
• Height *: 25” - 35” (standard), 21” - 31” (optional)
• Width: 29” or 31” (33” on Flex only)
• Length: 72” Flex Top and Backrest Top
73” Flat Top
• Lift Capacity: 625 lbs Maximum Working Load
• Weight: 157-182 lbs. (depends on model)
• Top: Powered Flex Top
Powered Backrest Top
Round Corner Flat Top
• Electronics: 1 Hand Control & 1 Foot Control
• Padding: Aero·Cel ™ System
• Upholstery: Ultratouch II or TerraTouch ™
• Cabinetry: Wood/Maple
For electrical specs, see Specifications Chart
* measurements are determined from floor to top of seat pad using
standard padding; these measurements can be affected by natural
material variations in padding
** published weight may differ due to options chosen, natural
material variations and padding density
Self Adjusting
Removable
Arm Rests (2)
(optional)
Hand
Control (1)
Sliding Cabinet doors / 2
(access both sides)
Upholstered
Top
QuickLock ™
Face Rest
(optional)
Back Rest
Section
Fully Enclosed
Cabinet Base
Accessory
Outlets (2)
Vertical
Hydraulic
Lift Columns (4)
Leg
Section
Seat
Section
PRODUCT DESCRIPTION
Foot
Control (1)
Antigua ™
Thigh
Section