New England Arbors VA42062 - Manual (Page 21)

21
10 x 10 Flat Top Louvered Pergola
To adjust the positions of the louvers, slide the Turn Bar in
between two louver boards and turn in a circular motion to the
desired position. Excessive force should not be required.
For best leverage, push with the arm of the Turn Bar as opposed
to ‘prying’ with the Turn Bar Cap(see illustrations).
If operation proves to be difficult, this may be caused by nut(s)
that are too tight. Troubleshoot which nut is too tight by turning
them one by one, check for resistance, and loosen the nut slighty.
Only loosen the nut a quarter of a turn at a time as it may come off.
If your area experiences heavy snow, make sure to keep the
louvers in the OPEN position. The accumulation of snow will
cause the louvers to buckle and collapse.
1
2
O P E R AT I O N S
3
www.newenglandarbors.com
1
8
9
2
4