New England Arbors VA42062 - Manual (Page 11)

11
10 x 10 Flat Top louvered Pergola
Vinyl Beam Assembly
Using four 1 1/2” screws provided, fasten the Beam Joiners,
Beams and Wood together as shown.
Now that the wood is secured in place, use the predrilled holes
as templates and drill 1/2” holes through the wood as shown.
Make sure to drill straight through to the other side of the beam.
Repeat for all four beams.
3
4
5
www.newenglandarbors.com
3
4
Vinyl Rafter Assembly
1
S T E P F I V E
To accomodate the notches on the rafters, first the wood inserts
must be notched out as shown below:
Six will be needed.
✁ ✂ ✄ ☎ ✁ ✂ ✆
✝ ✞ ✁ ✂
✟ ✠ ✡ ✁ ✂
✝ ✞ ✁ ✂
✁ ✂ ✄ ☎ ✁ ✂ ✆