New England Arbors VA42062 - Manual (Page 20)

Turn Bar Holder Installation
1
1
2
S T E P E I G H T
20
10 x 10 Flat Top Louvered Pergola
www.newenglandarbors.com
The Turn Bar Holder can be found with the hardware kit and is
designed to provide a place to keep the Turn Bar when not in use.
Pick a location that is easily accessible and out of the way of the
louvers operation. The post is recommended as the 2 1/2” screws
are used to protrude into the wooden post, providing a secure
mounting support.
Mount with the slot on the top and closer to the post as shown.
Fasten with two 2 1/2” screws provided.
Hang the Turn Bar as shown.
3
2
Slot on the top and
closer to the post.
3