Link test, Interactive commands, Payload length payload – Moog Crossbow NAV440 Series User Manual
Page 61: 16‐bit crc‐ccitt messaging overview, Apter 9, Communicating with the 440series units, Table 13 message table

440 User M
7430‐0131‐01 Rev. F
NAV
anual
Page 61
Payload Length
The payload length is always a one byte unsigned character with a range of 0‐255. The payload length byte is the
length (in bytes) of the
Payload
The payload is of variable length based on the packet type.
16‐Bit CRC‐CCITT
Packets end with a 16‐bit CRC‐CCITT calculated on the entire packet excluding the 0x5555 header and the CRC field
itself. A discussion of the 16‐bit CRC‐CCITT and sample code for implementing the computation of the CRC is
included at the end of this document. This 16‐bit CRC standard is maintained by the International
Union (ITU).
Telecommunication
Width: 16 bits
Polynomial: 0x1021
Initial value:0xFFFF
OR is performe
No X
Refer to Appendix C. Sample Packet—Parser Code for sample code that implements the 16‐bit CRC algorithm.
Messaging Overview
The following table summarizes the messages available with a 440 Series model. Packet types are assigned mostly
using the ASCII mnemonics defined above and are indicated in the summary table below and in the detailed sections
for each command. The payload byte‐length is often related to other data elements in the packet as defined in the
table below. The referenced variables are defined in the following sections.
Output messages are sent from the 440Series inertial system to the user system as a result of a poll request or a
continuous packet output setting. Input messages are sent from the user system to the 440 Series inertial system
and will result in an associated Reply Message or NAK message. Reply messages typically have the same <2byte
acket type (U2)>
p
as the input message that evoked it but with a different payload.
Table 13 Message Table
ASCII
Mnemonic
<2‐byte packet
ype (U2)>
t
U1)>
(
Description
Type
Available
unctions
F
Link Test
PK
0x504B
0
Ping Command
and Response
Input/Reply Message
ALL
CH
0x4348
N
Echo Command
and Response
Input/Reply Message
ALL
Interactive Co
mmands
GP
0x4750
2
Get Packet
Request
Input Message
ALL
AR
0x4152
0
Algorithm Reset
Input/Reply Message
VG,AHRS, NAV