Moog Crossbow NAV440 Series - Manual (Page 53)

NAV440 User Manual
7430‐0131‐01 Rev. F
Page 53
Viewing Current Configuration
To view the current configuration, click the Get All
Values rrent settings will be displa
the text fields.
Under
button. The cu yed in
Current Value, a box filled with blue color
indicates the status field is enabled. Refer to Figure 16.
Changing Configurations
To change a configuration setting:
1. Checkmark the desired item(s) in the left Colum
p menus in right colum , select the 2. Using the dro the n
new values.
3. Select either Temporary or Permanent.
Temporary: The configuration will not be stored in
non‐volatile memory (EEPROM). The configuration
will be applied, but the unit will return to the
Permanent configuration when it is rebooted.
Permanent: The configuration will be stored in non‐
ll continue to use the
tion after b ooted.
volatile memory. The unit wi
configura eing reb
4. Click the Set Values button.
The configuration values will be saved as specified:
Temporary or Permanent.
Figure 16 Unit Configuration
NOTE: In most cases a Ensure that the settings selected are compatible with the system that is being configured.
FAIL message will appear if incompatible selections are made.
NOTE: Unit orientation selections must conform to the right hand coordinate system as noted in 440 Series Default
Coordinate System, page 22. Selecting orientations that do not conform to these criteria are not allowed.
Adv
ing.
anced
The Advanced tab provides access to more complex configurations, such as user behavior sett