Moog Crossbow NAV440 Series - Manual (Page 13)

AV440 User Manual
0131‐01 Rev. F
Page 13 N
7430‐
Preface
This document provides information about the 440 Series Inertial Systems, including operational functions and
configuration options.
Intended Audience
This document is intended for those who install, configure, extract data and use inertial systems. It is assumed the
reader is familiar with the technology of navigation. For advanced use of the 440 Series , knowledge of C
programming is required.
Contents
Table 1 Chapter Summaries
Chapter / Appendix Summary
Chapter 1. 440 Series Overview Summary of features
Chapter 2. 440 Series Functions In‐depth descriptions of IMU, VG, AHRS and NAV functions
Chapter 3. Hardware Interface Connectors and pin outs
Chapter 4. Magnetometer
Calibration and Alignment
Guidelines
Information and guidelines for magnetometer calibration.
Chapter 5. Installation Guidelines Instructions to install the 440 Series unit and NAV
application)
‐VIEW 2.2 (software
Chapter 6. Viewing and Logging
Data with NAV‐VIEW 2.2 Viewing data via GUI application (NAV‐VIEW 2.2)
Chapter 7. Configuring the 440
Series with NAV‐VIEW 2.2 Configuring and calibrating the unit via GUI application (NAV‐VIEW 2.2)
Chapter 9. Communicating with
the 440 C programming language for communication: test the unit, request and read
data
Chapter 10. Programming
Guidelines C programming language for configuration and calibration
Chapter 11. Built In Test (BIT) Description of the operation and the coding for BIT
Appendix B. Application Examples Configuration examples of the unit installed in various vehicles
Appendix C. Sample Packet—
Parser Code Example of parser code
Appendix D. Sample Pac
Decoding ket Examples of packet decoding
Appendix E. Mechanical
Specifications Mechanical specifications, and drawings and measurements of the units
Appendix F. Moog Crossbow
ervice Policies S
A summary of customer support services, warranty description, return
process and contact information