Moog Crossbow NAV440 Series - Manual (Page 54)

Page 54
NAV440 User Manual
7430‐0131‐01 Rev. F
Viewing Current Configuration
To view the current configuration, click the Get All
Values rrent settings will be displa
the text fields.
Under
button. The cu yed in
Current Value, a box filled with blue color
indicates the status field is enabled. Refer to Figure 17.
Changing Configurati
1. T e
ons
o nable a switch
esired item under a. Checkmark the d
2. T s
Value to Set.
o et a value, under Value to Set:
. The a. checkmark the box of the desired item(s)
fields of the selected items will ungrey.
b. For each item, checkmark the box under Modify
new value under and enter the S Value to et.
c. Select either Temporary or Permanent.
Temporary: The configuration will not be stored in
non‐volatile memory (EEPROM). The configuration
will be applied, but the unit will return to the
Permanent configuration when it is rebooted.
Permanent: The configuration will be stored in non‐
ll continue to use the
tion after b ooted.
volatile memory. The unit wi
configura
eing reb
3. Click the Set Values button.
The configuration values will be saved as specified:
Temporary or Permanent.
Figure 17 Advanced Settings
BIT Configuration
BIT Configuration enables configuring the logic of individual status flags that affect the masterStatus flag in the
master BIT status field. Enabling individual status flags determines which flags are logically OR’ed to generate the
masterStatus flag. This provides the flexibility to listen to the indications that affect specified applications. For more
information about BIT status fields, refer to on page . BIT Status Fields 93