beautypg.com

Page 37, Mounting the printer – MF Digital CD-QuadraPRO (Rev: 08/01/02) User Manual

Page 38

background image


CD-3706/P

Operator’s Guide

Document Revision: 030501.1

QuadraPRO LX Operator’s Guide

Document Revision: 080102

Page 37

3) Lay the printer on its back and place the remaining bracket on the printer as pictured

below. Line up the holes and fasten in place using four countersunk screws provided.
















Mounting the Printer

• Remove the two thumb-screws from

the bracket attached to the top of the
drive bays.

• Loosen the three screws in the

bracket attached to the printer.

• Gently place the printer on the top of

the drive bays.

• Line up the holes from which you

removed the screws in the lower drive
bay bracket with the key-ways of the
bracket attached to the printer, and
replace screws loosely threaded.