MF Digital CD-QuadraPRO (Rev: 08/01/02) - Manual (Page 12)

CD-3706/P Operator’s Guide
Document Revision: 030501.1 QuadraPRO LX Operator’s Guide
Document Revision: 080102
Page 11
Removing Picker Column Restraint
The QuadraPRO ships with a picker column restraint to reduce the
possibility of damage in transit. This restraint must be removed before
operation or power-on. Once removed, save the restraint bracket and
reattach it when transporting the unit in the future.
To detach the bracket:
1. Remove the four screws that hold it in place as depicted below using a
Phillips screwdriver (Do NOT discard the screws).