Page 24, Press the “2” key. the screen will now read, Press the start/yes key to enable “multiple images – MF Digital CD-QuadraPRO (Rev: 08/01/02) User Manual
Page 25: Press the “copy” key. the screen will now read, Press the “stop/no” key. the screen will now read

CD-3706/P
Operator’s Guide
Document Revision: 030501.1
QuadraPRO LX Operator’s Guide
Document Revision: 080102
Page 24
Creating Multiple Hard Disk Images
The Multiple Images feature allows the QuadraPRO’s internal hard disk to
store up to four master disc images. The factory setting for this function is
“disabled”. To enable it, and create multiple image files, proceed as
follows:
• From the main operating screen depicted below:
S E L E C T C O P Y O R C O M P A R E
• Press the “2” key. The screen will now read:
0 = V E R I F Y A F T E R C O P Y
S E L E C T O P T I O N S
1 = M U L T I P L E I M A G E S
S E L E C T O P T I O N S
2 = C L I C K D E T E C T I O N
S E L E C T O P T I O N S
3 = C O P Y P R O T E C T I O N
S E L E C T O P T I O N S
5 = P R I N T E R
S E L E C T O P T I O N S
• Press the “1” key to select multiple images. The screen will now read:
M U L T I P L E I M A G E S M O D E
S E L E C T O P T I O N
• Press the START/YES key to enable “Multiple Images”.
M U L T I P L E I M A G E S S E L E C T E D
S E L E C T O P T I O N
• You will then be returned to the main operating screen:
S E L E C T C O P Y O R C O M P A R E
• Press the “COPY” key. The screen will now read:
F R O M H D ?
• Press the “STOP/NO” key. The screen will now read: