Maxim Integrated 73M1866B/73M1966B Reference Driver - Manual (Page 97)

UG_1x66B_015 73M1866B/73M1966B Reference Driver User Guide
Rev. 2.7 97
Revision History
Revision Date Description
2.0 8/22/2008 First publication.
2.2 12/15/2008 In Section 2.4.1 , changed the name of the rcvry_tasklet_rtn tasklet to
m1966_pll_recovery_processing().
Replaced the contents of
Table 2 .
In Section 6.1 , added four new files (sys_drv_os.c,
73m1966_regs.h , drv_config_user.h and sys_drv_os.h) with
descriptions.
In
Section 6.2 , replaced the macros with new macros.
In Appendix B , replaced the default parameters with more meaningful
names.
2.3 2/24/2009 Added Section 2.6, Country Specific Parameters .
Updated Table 1 .
Added Section 4.1.12, M1966_PCM_ACTIVATION CLEAR .
Updated Table 7 .
2.4 3/20/2009 Rewrote Section 2.4 .
Added a new Section 2.4.1, Driver States .
Deleted Figure 3, Driver State Transition Diagram.
Rewrote
Section 2.4.5, m1966_ring_end analysis() and Section 2.4.6,
m1966_line_state_analysis() .
Rewrote Section 3, Driver Service Interface and Section 3.1 Linux
Operating System .
Changed all instances of “File descriptor” to either “Channel descriptor”
or “Device descriptor and correspondingly changed “fd” to “chan_fd” or
“dev_fd”.
Added Descriptor columns to Table 1 through Table 4 .
In Section 3.1 , added “In this example the minor number base 10 can be
changed, please see compile time configurable parameter in Section
8.2.” to the third paragraph.
In
Table 1 , added “M1966_DEBUG_LEVEL_SET”.
Added Section 4.5 , M1966_DEBUG_LEVEL_SET.
Re-wrote Section 5.2 , adding a new typedef struct.
Added Section 5.3 , M1966_DEBUG_TRACE_MASK.
In Section 6.2 , changed “241” to “221”.
2.5 5/29/2009 Added a new Section 2, Overview .
Move Driver Architecture into Section 2 .
Re-wrote Section 5, FXO Events .
Changed Section 6.2.5 – M1966_EVENT_GET .
Added a new Section 6.5, Ring Detection Services .
Added a new Section 6.6, Line State Analysis Services .
Added a new Section 7.4, Line Measurement Related Data Types and
Structures .
Removed Appendix B – Default Parameters.