Maxim Integrated 73M1866B/73M1966B Reference Driver - Manual (Page 21)

UG_1x66B_015 73M1866B/73M1966B Reference Driver User Guide
Rev. 2.7 21
5.2.16 M1966_DEVICE_RECOVERED
This event is generated after the device is successfully recovered from a failure.
Parameters
Data Type Name Description
unsigned int event_id M1966_DEVICE_RECOVERED .
unsigned int channel_id Channel ID.
unsigned int event_cnt Number of events that remain in the queue.
unsigned int event_data1 N/A.
unsigned int event_data2 N/A.
unsigned int event_data3 N/A.
unsigned int event_data4 N/A.
5.2.17 M1966_GPIO_INTERRUPT
This event occurs when an input GPIO interrupt is triggered. The “data1” field contains the source GPIO
that generates the interrupt.
Parameters
Data Type Name Description
unsigned int event_id M1966_GPIO_INTERRUPT.
unsigned int channel_cid Channel CID.
unsigned int event_cnt Number of events that remain in the queue.
unsigned int event_data1 M1966_GPIO_NUMBER – the GPIO that triggers the
interrupt event.
unsigned int event_data2 N/A
unsigned int event_data3 N/A
unsigned int event_data4 N/A
5.2.18 M1966_ONH_DETECT
This event occurs when the FXO line goes on-hook. This generally occurs after device recovery from a
failure.
Parameters
Data Type Name Description
unsigned int event_id M1966_ONH_DETECT .
unsigned int channel_cid Channel CID.
unsigned int event_cnt Number of events that remain in the queue.
unsigned int event_data1 N/A
unsigned int event_data2 N/A
unsigned int event_data3 N/A
unsigned int event_data4 N/A