Maxim Integrated 73M1866B/73M1966B Reference Driver - Manual (Page 84)

73M1866B/73M1966B Reference Driver User Guide UG_1x66B_015
84 Rev. 2.7
7.12.5 M1966_GPIO_DATA_TYPE
Description
GPIO data types – this is the GPIO data returned from the M1966_GPIO_DATA_GET access command,
or data to be written to the GPIO port using the M1966_GPIO_DATA_SET access command.
Prototype
typedef enum
{
M1966_GPIO_DATA_LOW = 0, /* GPIO data - low */
M1966_GPIO_DATA_HIGH = 1 /* GPIO data - high */
}
M1966_GPIO_DATA_TYPE;
Parameters
Name Value Description
M1966_GPIO_DATA_LOW 0 GPIO data – low.
M1966_GPIO_DATA_HIGH 1 GPIO data – high.
7.12.6 M1966_GPIO_SIGNAL_DIRECTION
Description
GPIO pin signal direction. This control bit is used to designate the GPIO pin as either input or output.
Prototype
typedef enum {
M1966_GPIO_DIR_INPUT = 0, /* GPIO pin signal direction – INPUT */
M1966_GPIO_DIR_OUTPUT = 1 /* GPIO pin signal direction - OUTPUT */
}
M1966_GPIO_SIGNAL_DIRECTION;
Parameters
Name Value Description
M1966_GPIO_DIR_INPUT 0 GPIO pin signal direction – INPUT.
M1966_GPIO_DIR_OUTPUT 1 GPIO pin signal direction – OUTPUT.