Compaq 281862-002 - Manual (Page 88)

6-5
Compaq Integrated Remote Console User Guide
Writer: Caroline Juszczak Project: Compaq Integrated Remote Console User Guide Comments: 281862-002
File Name: G-CH06.DOC Last Saved On: 11/20/98 4:17 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Modem Configuration Strings
For IRC to function correctly, the modem must be configured correctly. The
modem is configured using the primary and secondary initialization strings,
which are specified during the configuration process. For many modems, the
proper initialization strings can be found in Appendix A. This section provides
the information necessary to determine the proper initialization strings for
modems not listed in this chapter.
To function in a wide array of computing environments, modems have many
configuration options. Table 6-2 provides a summary of those settings which
are important for compatibility with IRC.
Table 6-2
Modem Configuration Setting Summary
Parameter Configuration Value (AT Command)
Computer to Modem serial port speed Fixed (varies)
Data Carrier Detect Operation Normal (&C1)
Data Terminal Ready Interpretation Normal (&D2)
Flow Control Hardware (varies)
Error Control Enabled (varies)
Response Codes Only important if using modem sharing –
Configure identically to operating system
(varies)