Compaq 281862-002 - Manual (Page 16)

2-2 Setup and Configuration
Writer: Caroline Juszczak Project: Compaq Integrated Remote Console User Guide Comments: 281862-00x
File Name: C-CH02.DOC Last Saved On: 11/20/98 12:54 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Configuring the Modem
Configuring a non “plug-n-play” ISA Modem
The Compaq System Configuration Utility does not automatically detect non
plug-n-play ISA devices. Therefore, you must manually account for system
resources used by an installed ISA modem. To configure the modem:
1. Boot the server and run the Compaq System Configuration Utility. This
utility can be run from floppies or by booting the Compaq SmartStart
and Support Software CD included with your server. If you created a
system partition during the initial setup of the server, you can invoke
this utility by pressing the F10 key when prompted during the server’s
power-on-self-test sequence.
2. Select the System Configuration menu option from the utilities main
menu.
3. Select Configure Hardware from the configuration menu.
4. Select Step 2: Add or Remove Boards from the System Configuration
main menu.
5. Press Insert to manually add a board to the server configuration.