Citizen Systems Citizen CLP 8301 CLP-8301 - Manual (Page 54)

Chapter 6 Configuring Your Printer Using the Menus
− 41 −
Chapter
6
Configuring Your Printer Using the Menus
This chapter explains all the possible menu options for configuring the barcode printer. Refer to
Chapter 5 for information on the operation of the menus system and which keys perform which actions.
6.1 The Group Menu
The printer has two modes of operation: Ready mode and Menu mode. To switch between the modes,
press the key. The Group Menu is the first level of menus after entering the Menu Mode from
Ready Mode. Each of the subsequent sections explains the individual menu options.
Set print attributes such as print speed, print darkness,
printing method and page format. See Section 6.2
Set label detection method, sensing level, buzzer,
time/date etc. See Section 6.3
Set what action the printer performs after printing a
label, e.g. tear off, cut or peeling. See Section 6.4
Set up interface parameters for RS-232C serial
network IP address. See Section 6.5
Save changes to printer’s configuration permanently in
memory. See Section 6.6
Produce a configuration printout, test sample or
perform a head error check. See Section 6.7
Menu Mode
Ready Mode
or
or
or
or
or
or