Citizen Systems Citizen CLP 8301 CLP-8301 - Manual (Page 45)

Chapter 5 Power ON and Using the Control Panel
− 34 −
5.2 Turning the printer ON
Turn ON the power switch.
•
Press “|” for ON.
•
Press “O” to turn off the printer.
Once the power is turned ON, the following initial messages are displayed on the screen for
about three seconds.
Power ON
Firmware version is
displayed
The printer checks the
printhead for damage
Disconnected or damaged
printhead element position is
displayed in mm or inches
Pressing any key other
than
continues
to the next step Date and time are
displayed (when
clock module is
installed)