Culligan Aqua-Cleer Advanced Drinking Water Systems - Manual (Page 14)

Chapter
Heading
14
Important Notice: Read this Performance Data Sheet and compare the capabilities
of this system with your actual water treatment needs. It is recommended that, before
installing a water treatment system, you have your water supply tested to determine your
actual water treatment needs.
Culligan knows the more informed you are about your water treatment systems, the more
confident you will be about its performance. It’s because of this and more than seventy
years of commitment to customer satisfaction that Culligan is providing this Performance
Data Sheet to its customers.
Company: Culligan International Company
999 West Higgins Road, Suite 1100
Rosemont, IL 60018 USA
(847) 40-2800
Product: Culligan Aqua-Cleer Advanced Drinking Water Systems
Use Guidelines:
• Working Pressure: 40 – 120 psig (280-827 kPa)
• Do not allow exposure to temperature below °F (1°C)
• Maximum operating temperature: 100°F (8°C)
• These systems must be installed according to local plumbing codes on the cold
water line.
• This system requires regular replacement of all filters to maintain proper operation.
Depending on usage and influent water quality, the carbon and particulate filters
should be changed at least annually and the reverse osmosis membrane should
be replaced every -5 years. Varying chlorine, sediment or TDS levels may affect
replacement frequency.
CAUTION! Do not use with water that is microbiologically unsafe
or of unknown quality without adequate disinfection before or after
the system. Systems certified for cyst reduction may be used on
disinfected water that may contain filterable cysts.
Performance
Data Sheet