Running the device manager – Avaya C360 User Manual
Page 195
Running the Device Manager
Issue 1 July 2006
195
Running the Device Manager
Note:
Note:
Assign an inband or out-of-band interface IP address to the switch before
beginning this procedure.
To run the Device Manager:
1. Open your browser.
2. Enter the URL of the switch in the format http://aaa.bbb.ccc.ddd where
aaa.bbb.ccc.ddd
is the inband or outband interface IP address of the switch.
- The user name is "root"
- The default password for read-only access is "root"
- The default passwords for read-write access is "root".
Note:
Note:
The C360 Device Manager passwords are the same as those of the CLI. If you
change the passwords of the CLI then those passwords become active for
Device Management as well. For further information on the passwords, please
refer to
3. The welcome page is displayed. See
Display the SNMP time-out
parameter
show snmp time-out
Display the URL of the Web
server with the help files and the
Java plug-in
show web aux-files-url
In order to...
Use the following command...