Cabletron Systems SmartSTACK 100 - Manual (Page 75)

Monitoring and Managing Your ELS100-16TX
4-7
To display all MAC addresses, at the LCM prompt:
1. Type addresses display any
LCM responds with a list of all MAC addresses, their
associated ports, the type, age, and number of frames from and
to that address.
If you do not specify any , only the learned addresses are displayed.
To display a specific address, at the LCM prompt:
1. Type addresses display
For example, if you typed, addresses display
02:04:06:03:2a:43 , LCM would display the following
information:
You can display a range of addresses by using a net mask. This is
helpful when determining the status associated with stations
containing the same make of Ethernet network interface cards. At
the LCM prompt:
1. Type addresses display
For example, to see all addresses that begin with 02:04:06, you
would enter:
addresses display 02:04:06:00:00:00 ff:ff:ff:00:00:00
Address Type Port Age(secs)
08:00:20:02:3a:44 Learned 3 26
Enter to continue, Ctrl-C to exit:
Address Type Port Age(secs)
02:04:06:03:2a:43 Learned 5 21