Cabletron Systems SmartSTACK 100 - Manual (Page 72)

4-4
Monitoring and Managing Your ELS100-16TX
4.3 USING LCM TO CHECK ELS100-16TX STATUS
The LCM commands that enable you to quickly check on the status
of the ELS100-16TX include:
• Status
• Address display
• Ipaddr
• Ident
These LCM commands are described in the sections that follow.
4.3.1 Displaying Status
The status command displays the status of the ELS100-16TX and
automatically pages through the status of all of the Ethernet ports,
pausing at each screen of information.
At the LCM prompt:
1. Type status
LCM displays the following type of information.
Note: You can also use the status command to display status for
individual Ethernet ports by typing status and specifying a port
number.