Talkswitch 48-CVA - Manual (Page 85)

Ring Patterns:
This option allows you to check the ring pattern of your Telephone Company
lines. When you activate this feature, you will need to call into any of the lines
connected to TalkSwitch and let it ring at least 3 times before the Auto Attendant
answers the call. After TalkSwitch captures 2 ring patterns, the information will
be displayed in a dialog box. Please take note of this information and pass it
along to Centrepoint Technologies Technical Support if you are having problems
with TalkSwitch answering the lines and playing the Auto Attendant.
3.3.5.5 Troubleshooting —Advanced
DTMF Detection:
If callers are complaining of being misdirected when they select options at the
Auto Attendant, then these values might need to be adjusted.
Minimum time: The default setting of 45ms should be adequate for most
environments. It may, however, be necessary to lower this value if TalkSwitch
appears to have trouble ‘hearing’ digits when dialed at the auto attendant. It
might need to be increased in cases where the system is ‘hearing’ ghost DTMFs
and accidentally misdirecting callers.
75 3.0 Configuring TalkSwitch
TS manual 11th ED_CVA_v11_CD_Release.qxd 7/13/2004 3:36 PM Page 75