Talkswitch 48-CVA - Manual (Page 67)

57 3.0 Configuring TalkSwitch
sections. For example, if you add a new Remote Extension (let’s say 211), when you
go to the Remote Extensions section, you will see that extension 211 has the
information you added in the ‘Add new Remote Extension’ screen. You will also note
that not all the information displayed in the extension tabs is available in the ‘Add
new...’ screens. This is because only the information that effects the original extension’s
Call Cascade functionality is offered.
3.3.3.6 Remote Extensions - Call Cascade
This section allows you to configure the incoming Call Cascade options for the
Remote Extensions. The Call Cascade routing options are only engaged if the
extension is chosen from the Auto Attendant or if a call is manually transferred to the
extension. Once a call enters an extension’s Call Cascade sequence, the extension
“owns” the call. It will not follow any other extension’s options, even if chosen in the
Call Cascade sequence—what you see in an extension’s Call Cascade sequence is
exactly what you’ll get. You can set up the Call Cascade sequences for both modes
(the scheduling for these modes are set up in the Modes tab).
For Remote Extensions, there are 3 different ‘Call Cascade’ options. For each of these
options, you can control how and where you want the incoming call to the extension
handled.
TS manual 11th ED_CVA_v11_CD_Release.qxd 7/13/2004 3:35 PM Page 57