Talkswitch 48-CVA - Manual (Page 34)

24 TalkSwitch User Manual
3.3.1.3 VoIP Configuration
This section deals with configuring your TalkSwitch for VoIP
In the “TalkSwitch Profile” section:
TalkSwitch has a built-in SIP Server Proxy / Registrar / Redirect server. This
facilitates the configuration and maintenance for multi-branch and teleworker
applications. One location needs to be assigned as the SIP Server so that it can
manage call requests between VoIP locations and the other locations need to
register with the SIP Server location.
To facilitate calling between TalkSwitch locations, we recommend that you use
TalkSwitch location codes 250-299 as phone numbers for each of your VoIP
Lines. Ensure no duplicate numbers are assigned between any 2 locations.
This TalkSwitch location is the Proxy / Registrar
If this location is going to be the Proxy / Registrar Server, then check this box.
When enabled and other SIP devices are registered with this system, then any
calls made within the group contact this device to resolve the destination
location. Once the destination is resolved, the call is made directly from the
source location to the destination location.
TS manual 11th ED_CVA_v11_CD_Release.qxd 7/13/2004 3:34 PM Page 24