beautypg.com

Gps receiver hardware settings – Juniper Systems AMXU GPS Expansion Pod User Manual

Page 8

background image

8

Field PC AMXU GPS Expansion Pod

When you are finished, click the “OK” button in the upper

right hand of the screen to confirm the settings.
Note: the External GPS control panel only support NMEA

messages from the GPS receiver.
For more information consult the Field PC Owner’s

Manual or Windows Mobile help files.

GPS Receiver Hardware Settings

Below are the default settings used to communicate with

the GPS receiver. If you are not using the GPS Manager

and your program needs to communicate directly with

the GPS receiver, you must put this information into your

GPS application.

„

COM3

„

38400 Baud

„

No Parity

„

8 data Bits

„

Stop Bit

Note: The GPS receiver uses the DTR signal on COM3 to

control power. If your GPS program has a checkbox or setting

to enable the DTR function, enable it for proper operation of the

GPS Expansion pod.
Juniper Systems LandMark Mobile GPS Utility has a DTR

function option which must be checked.