beautypg.com

5reference information, Gps pod setup utility – Juniper Systems AMXU GPS Expansion Pod User Manual

Page 5

background image

Field PC AMXU GPS Expansion Pod

5

Reference Information

GPS Pod Setup Utility

The internal GPS receiver settings are pre-configured

with the GPS Pod Setup utility as follows:

These settings work for most applications. To make

changes to the default settings, exit all GPS programs

on your Field PC (this is a requirement) and go to Start >

Programs > AMXU Pod Setup.
You can select which NMEA message strings are shown,

enable/disable SBAS (Satellite Based Augmentation

Systems)/WAAS, and indicate whether or not GPS is

always on (see the following page for details).
Check or uncheck options to enable or disable them.

Setting changes are preserved through suspend, resume

and complete power off. To exit the program, select “OK.”