CFM Corporation A053041 - Manual (Page 8)

9
Getting Started
Unpacking the Grill Parts
Tools needed to assemble grill:
·
·
·
1. Please follow the steps in the order that
they are presented.
2. Assemble the grill where you plan to use
it.
3. You may want to place an old towel or
cloth at the assembly site to prevent nuts
and bolts from becoming lost.
4. Have a friend help. An assistant can
make the assembly easier by holding the
parts in place while you fasten the nuts and
bolts.
5. To be ready to barbecue immediately,
have the L.P. gas cylinder filled by an
authorized L.P. dealer or cylinder exchange
center.
1. Remove and set aside all inner boxes
and parts from the master carton.
2. Remove and set aside all wrapping
paper and additional packaging from the
parts.
3. Do not destroy carton or packing until
your grill is completely assembled and
operating to your satisfaction.
10mm closed-end wrench*
Phillips-head screwdriver
17mm / 7mm open-end wrench*
*
(tools included)
A socket set or an adjustable wrench may be used
in place of the open-end wrenches if desired.
Assembly Instructions 2
Chapter
X-Frame Model Series Gas Grill