CFM Corporation A053041 - Manual (Page 17)

18
1. Align the lid handle bolts with the
mounting holes in the lid and set
the handle on the grill lid.
No tools are required for this step.
2.
3.
4.
5.
From the inside of the
lid, thread on a gasket
onto each bolt.
Place the Heat Shield
onto the bolts.
Thread on a washer
and wing nut for each
handle bolt.
Securely tighten the
wing nuts.
Assembly Step 9 - Installing the Lid Handle
Lid Handle
Handle
Heat Shield
LOCATE THESE PARTS:
M6 Wing
Nut (2)
M6 Flat
Washer (2)
Bolt
Gasket (2)
USE HARDWARE ”G”
A B C
C
A
B