beautypg.com

CFM Corporation A053041 User Manual

Page 6

background image

7

Have the gas dealer weigh the cylinder

after filling to ensure that the cylinder is not
overfilled.

TRANSPORTING A FULL CYLINDER

You should transport only one cylinder at a

time. Transport the cylinder in an upright and
secure manner with the control valve turned
off and the POL dust cap in place.

Do not transport a cylinder in the passenger

compartment of a vehicle.

Do not leave cylinder in direct sunlight or in

a high-heat area such as a closed car trunk.
High-heat areas could cause the relief valve
to vent gas.

Use a cylinder cap on the cylinder-valve

outlet during transport and when the cylinder
is not connected to the grill. Keep cylinder
valve closed when not in use.

The L.P. gas cylinder must have a shut-off

valve

A Type 1 compatible

cylinder with a Type 1 cylinder valve has a
positive seating connection that does not
permit gas flow until a positive seal has been
obtained.

The cylinder must be arranged for vapor

withdrawal. It must also include a collar to
protect the cylinder valve. A safety-relief
device having direct communication with the
vapor space of cylinder must be provided.
This will expel high-pressure gas if the
cylinder is overfilled or overheated.

All L.P. gas cylinders used with this

appliance shall be constructed and marked
in accordance with the specifications for L.P.
gas cylinders of the U.S. Department of
Transportation (DOT) or the National
Standard of Canada, CAN/CSA-B339,
Cylinders, Spheres and Tubes for
Transportation of Dangerous Goods; and
Commission, as applicable; and shall be
provided with a listed overfilling-prevention
device. Read labels on the L.P. gas-supply
cylinder.

Inform the gas dealer if it is a new or used

cylinder to be filled. Caution the gas dealer
not to overfill the fuel cylinder.

After filling, have the gas dealer check for

leaks and that the relief valve remains free to
function.

Allow only a qualified L.P. gas dealer to

fill or repair an L.P. gas-supply cylinder.

terminating in a Type 1 L.P. gas-

cylinder-valve outlet.

a.) Do not store a spare L.P. gas cylinder

under or near this appliance.

b.) Never fill the gas cylinder beyond 80

percent full.

c.) If the information in (a.) and (b.) Is not

followed exactly, a fire causing serious
injury or death may occur.

Handle a full cylinder with care.

Gas is under high pressure.

DANGER:

WARNING:

Do not insert any foreign objects

into the valve outlet. You may damage the
back check, A damaged back check can
cause a leak, which could result in explosion,
fire, severe personal injury or death.

DANGER: