CFM Corporation A053041 - Manual (Page 11)

C
D
12
1.
2.
3.
4.
Assemble the wheels and axle to the
tank-side foot as shown above right.
Insert the axle through the foot, one
wheel on each end, tighten one nut
and wheel washer on each end, and
snap the hub caps onto the wheels
Attach each foot to the bottom of
the frame assemblies as shown.
The legs will snap into the feet.
Be sure the
is on
the of the assembly as
shown.
For each mounting location,
insert 2 bolts with washers as
shown.
Once all of the bolts are
securely tightened,
position the assembly so
that the wheels are on
your left side as you
face it. (This is the front)
wheeled foot
left side
LOCATE THESE PARTS:
M10 Axle
Nut (2)
B
Wheel
Washer(2)
A
M6x15mm
Bolt (8)
C
M6 Flat
Washer (8)
D
USE HARDWARE ”B”
Left Foot
(tank side)
Hub
Cap
Axle
Nut
Wheel
Washer B
A
Wheel
Axle
Assembly Step 3 - Attach the Feet
Right Foot
Phillips head screwdriver
17mm Wrench
Tools Needed:
LEFT
FOOT