CFM Corporation A053041 - Manual (Page 20)

LOCATE THESE PARTS:
Drip Cup
Drip Cup
Holder
21
1.
2.
Insert the stem of the heat indicator into
the front of the lid, through the name
plate as shown.
From the inside of the lid, thread on the
heat indicator gasket and nut. Securely
tighten.
No tools are required for this step.
10mm wrench required for this step.
Assembly Step 12 - Install the Drip Cup
LOCATE THESE PARTS:
Heat
Indicator
Nut
Heat Indicator
Heat
Indicator
Gasket
Grease
Drain
Hole
1.
2.
Underneath the grill tub, insert the drip
cup holder into the mounting holes on
either side of the grease drain hole.
Set the drip cup into the drip cup holder.